- 3D Optical Profilometer
- Battery Cycler
- Bench-Top Lasers
- Environmental Monitoring
- Fuel Cell Tester
- Lab Equipment
- Laser Spectrum Analyzer
- Nanomechanical Testers
- Optical fibers
- Potentiostat / Galvanostat
- 1. Single Potentiostats
- 2. Multi Potentiostats
- 3. High Current Potentiostats
- 4. Impedance Analyzer
- 5. Ancillary Equipment
- 6. Accessories
- 7. Software
- 8. Liquid Conductivity System
- Radiation Measurements
- Scanning Probe Systems
- Scientific Cameras
- Stopped Flow Systems
- 14 July 2014
- Lac-Beauport, SnowHouse Solutions has reached an agreement with cyberTECHNOLOGIES (www.cybertechnologies.com) to promote... read more
Potentiostat / Galvanostat
Potentiostat / Galvanostat (43 items / page 4 of 5)
- EC-Lab® Express - Easy and user-friendly Software for new users
#EC-Lab® Express EC-Lab® Express - Easy and user-friendly Software for new users EC-lab® Express is the ideal software to start with Electrochemistry. With an easy-to-use straight-forward parameter input window, this unique interface gives a simple overview for the user to create, modify and visualize the...
- FC-45 - Standard Faraday Cage
#FC-45 FC-45 - Standard Faraday Cage Dimensions: 45 x 45 x 45 cm Material: stainless steel 430. Cable feed-through. A Feed-through (14 x 4 cm) is available on the left side. It is compatible with all Bio-Logic cables such as: - Standard cable - Cable with electrometer i.e. Low Current, Ultra...
- FlexP 0012 - High Voltage / High Power Booster
#FlexP 0012 FlexP 0012 - High Voltage / High Power Booster The FlexP 0012 is designed for battery stack/pack characterizations. The continuous maximum current of +/-200 A for a single unit can be extended up to +/-400 A by connecting two units in parallel. The instrument configuration can be easily changed...
- FlexP 0160 - High Voltage / High Power Booster
#FlexP 0160 FlexP 0160 - High Voltage / High Power Booster The FlexP 0160 is designed for battery stack/pack characterizations. The continuous maximum current of +/-50 A for a single unit can be extended up to +/-200 A by connecting four units in parallel. The instrument configuration can be easily changed...
- HCP-1005 - High current Potentiostat/Galvanostat/EIS for battery research
#HCP-1005 HCP-1005 - High current Potentiostat/Galvanostat/EIS for battery research The HCP-1005 is a compact high current potentiostat/galvanostat/FRA specially designed to study secondery batteries with a high capacity. With a voltage range of 0.6 to 5 V and a current range of ±100 A, this unit can...
- HCP-803 - High current Potentiostat/Galvanostat/EIS
#HCP-803 HCP-803 - High current Potentiostat/Galvanostat/EIS The HCP-803 is a high current potentiostat capable of producing 80 A with a voltage range of ±3 V. It is primarily designed for applications in the fuel cell and supercapacitor areas. It is a combination of a research quality potentiostat...
- HTF-1100 is a High Temperature Furnace
#HTF-1100 HTF-1100 is a High Temperature Furnace able to reach 1100°C This furnace has to be used in conjunction with a MTZ-35 impedance analyzer and a specific sample holder designed for high temperature measurements. HTF-1100 consists of a temperature control unit, an alumina heater and a slide on...
- HTSH-1100 – High Temperature Sample Holder
#HTSH-1100 HTSH-1100 - High Temperature Sample Holder The High Temperature Sample Holder is specially designed for impedance measurements at high temperatures up to 1100 °C. It is made with high purity alumina. The solid sample is sandwiched between two platinum disks (3 mm, 6 mm, 12 mm and 25 mm diameter)...
- ITS - Intermediate Temperature System
#ITS ITS - Intermediate Temperature System Compact temperature control solution for material testing The Intermediate Temperature System (ITS) is a temperature control unit based on Peltier effect. The ITS is a compact temperature chamber with a small footprint. It enables accurate temperature...
|< 1 2 3 4 5 Next|