- 3D Optical Profilometer
- Battery Cycler
- Bench-Top Lasers
- Environmental Monitoring
- Fuel Cell Tester
- Lab Equipment
- Laser Spectrum Analyzer
- Nanomechanical Testers
- Optical fibers
- Potentiostat / Galvanostat
- Radiation Measurements
- Scanning Probe Systems
- Scientific Cameras
- Stopped Flow Systems
- 14 July 2014
- Lac-Beauport, SnowHouse Solutions has reached an agreement with cyberTECHNOLOGIES (www.cybertechnologies.com) to promote... read more
Modular Spectrometers / 5. Light Sources, Fibers, Software & Accessories
Modular Spectrometers / 5. Light Sources, Fibers, Software & Accessories (32 items / page 1 of 4)
- ACF - Adjustable Cuvette Sampling Fixtures
#ACF ACF - Adjustable Cuvette Sampling Fixtures The ACF adjustable cuvette sampling fixture allows you to adjust the path-length through your sample, allowing for a wide range of cuvettes sizes to be used. Additionally, the centerpiece is removable, allowing you to measure transmission using large...
- BAT100 - Manual Attenuators
#BAT100 BAT100 - Manual Attenuators The BAT100 manual attenuator is used to attenuate bright sources in order to prevent the signal from saturating the spectrometer. This is achieved by manually adjusting a thumbscrew positioned directly in front of the face of the fiber. The BAT100 consists of...
- BCH100A / BCH103A - 2 & 3 Port Cuvette Holders
#BCH100A / BCH103A BCH100A / BCH103A - 2 & 3 Port Cuvette Holders The BCH cuvette sample holder series is spring-loaded and holds a standard 12.5 x 12.5mm (OD) (1cm path length) cuvette for liquid or powder sample transmittance and absorbance with proper spectrometer and light source setup. The cuvette sample...
- BDS - Low Power Deuterium/ Tungsten Light Source
#BDS BDS - Low Power Deuterium/ Tungsten Light Source The BDS100 is a DC powered turnkey SMA 905 fiber coupled UV/Vis/NIR light source with spectral output from 200nm to >1100nm. The 3W UV/Vis lamp is an electrode-less, RF induced deuterium lamp which shares a single optical path with the 3W...
- BDS130 - High Power Deuterium/ Tungsten Light Source
#BDS130 BDS130 - High Power Deuterium/ Tungsten Light Source The BDS130 is an AC powered turnkey SMA 905 fiber coupled UV/Vis/NIR light source with a spectral output of 190nm to >2500nm. The 30W UV/Vis deuterium lamp and 5W Vis/NIR tungsten halogen lamp share a single optical path. Features include...
- BFA/BRS - Bifurcated Fiber Optic Bundles
#BFA/BRS BFA/BRS - Bifurcated Fiber Optic Bundles A bifurcated fiber assembly is the most common example of a fiber optic bundle and is used to either split a signal or combine signals. The BFA series combines optical fibers at a common end with the fiber optic bundle bifurcated into two separate...
- BFH105 - Filter Holders
#BFH105 BFH105 - Filter Holders BFH105 inline filter holders are designed for fiber coupling and ease of handling. They can hold up to three standard filters (1inch in diameter, 5mm thick - not included). The BFH105 has two SMA 905 fiber connections and can be used with any fiber coupled spectrometer...
- BIP2.0 - Integrating Sphere with Integrated Light Source
#BIP2.0 BIP2.0 - Integrating Sphere with Integrated Light Source The BIP2.0 compact, fiber coupled integrating sphere with integrated light source is designed for the measurement of diffuse reflectance when used with a fiber optic spectrometer. It uses ?d/8? geometry, which is required for reflectance...
- BIS1.5A - ntegrating Sphere
#BIS1.5A BIS1.5A - ntegrating Sphere The BIS1.5A compact fiber coupled integrating sphere is machined from PTFE and is the ideal solution for the measurement of diffuse light. It has a diffuse reflectance of 99% between 400nm and 800nm, >98% between 300nm and 1800nm (UV-Vis-NIR region), and >92%...
|1 2 3 4 Next|