- 3D Optical Profilometer
- Battery Cycler
- Environmental Monitoring
- Fuel Cell Tester
- Lab Equipment
- Laser Spectrum Analyzer
- Optical fibers
- Potentiostat / Galvanostat
- 1. Single Potentiostats
- 2. Multi Potentiostats
- 3. High Current Potentiostats
- 4. Impedance Analyzer
- 5. Ancillary Equipment
- 6. Accessories
- 7. Software
- 8. Liquid Conductivity System
- Radiation Measurements
- Scanning Probe Systems
- Scientific Cameras
- Stopped Flow Systems
- 14 July 2014
- Lac-Beauport, SnowHouse Solutions has reached an agreement with cyberTECHNOLOGIES (www.cybertechnologies.com) to promote... read more
Potentiostat / Galvanostat / 5. Ancillary Equipment
Potentiostat / Galvanostat / 5. Ancillary Equipment (8 items / page 1 of 1)
- CESH - Controlled Environment Sample Holder
#CESH CESH - Controlled Environment Sample Holder The Controlled Environment Sample Holder (CESH) is a new sample holder dedicated to material impedance spectroscopy under controlled atmosphere. This device has been designed to withstand temperatures from -40 °C and +150 °C. The CESH allows accurate...
- FC-45 - Standard Faraday Cage
#FC-45 FC-45 - Standard Faraday Cage Dimensions: 45 x 45 x 45 cm Material: stainless steel 430. Cable feed-through. A Feed-through (14 x 4 cm) is available on the left side. It is compatible with all Bio-Logic cables such as: - Standard cable - Cable with electrometer i.e. Low Current, Ultra...
- HTF-1100 is a High Temperature Furnace
#HTF-1100 HTF-1100 is a High Temperature Furnace able to reach 1100°C This furnace has to be used in conjunction with a MTZ-35 impedance analyzer and a specific sample holder designed for high temperature measurements. HTF-1100 consists of a temperature control unit, an alumina heater and a slide on...
- HTSH-1100 – High Temperature Sample Holder
#HTSH-1100 HTSH-1100 - High Temperature Sample Holder The High Temperature Sample Holder is specially designed for impedance measurements at high temperatures up to 1100 °C. It is made with high purity alumina. The solid sample is sandwiched between two platinum disks (3 mm, 6 mm, 12 mm and 25 mm diameter)...
- ITS - Intermediate Temperature System
#ITS ITS - Intermediate Temperature System Compact temperature control solution for material testing The Intermediate Temperature System (ITS) is a temperature control unit based on Peltier effect. The ITS is a compact temperature chamber with a small footprint. It enables accurate temperature...
- Quartz Crystal Analyzer (QCA922A)
#QCA922A Quartz Crystal Analyzer (QCA922A) The QCA922 is a sensitive Quartz Crystal Microbalance developed by Seiko EG&G The instrument monitors both the resonant frequency and the resonant resistance which are also reflected on the two analog outputs. It is possible to connect the Quartz Crystal...
- Quartz Crystal Microbalance AWS A20
#QCM - AWS A20 Sensitive and full featured The AWS A20 system is a real-time and sensitive monitoring of surface-bound interactions, such as adsorption and desorption processes, characterization of molecular interactions, protein conformational changes, etc. The technology in the AWS A20 is based on the...
- Rotating Ring Disk Electrode Rotator (RRDE-3A)
#RRDE-3A Rotating Ring Disk Electrode Rotator (RRDE-3A) RRDE-3A is a constant rotation system for use in hydrodynamic modulation rotating ring disk electrochemistry. A 7 mm diameter electrode with short stainless steel shaft provides for a miniature and concentric circle electrode system that is capable...